Advanced Diamond Technologies exhibiting at TPS 2018

TPS (Turbomachinery & Pump Symposia) is the premiere conference for rotating equipment engineers and technicians worldwide, spanning oil and gas, petrochemical, chemical, power, aerospace, and water industries. TPS 2018 will be held at the George R. Brown Convention Center in Houston, Texas, September 18  – 20.  The symposia exhibition will feature booths from more than 350 leading companies from the oil and gas, petrochemical, power, pump and turbomachinery industries.

Visit us at booth 1539.  Advanced Diamond Technologies (ADT) will be highlighting our patented UNCD diamond coatings for seals, bearings, and other high wear surfaces in rotating equipment. Video demonstrations of product performance, as well as case studies of field performance and ROI, will be featured.

Contact: Bob Ashby, VP of Sales – Industrial Products; bashby@thindiamond.com

ADT to Exhibit at TPS 2017 December 12-14

TPS (Turbomachinery & Pump Symposia) is the premiere conference for rotating equipment engineers and technicians worldwide, spanning oil and gas, petrochemical, chemical, power, aerospace, and water industries. TPS 2017 will be held at the George R. Brown Convention Center in Houston, Texas, December 12 – 14. The symposia exhibition will feature booths from more than 350 leading companies from the oil and gas, petrochemical, power, pump and turbomachinery industries.

Advanced Diamond Technologies (ADT) will be highlighting our patented UNCD diamond coatings for seals, bearings, and other high wear surfaces in rotating equipment. Video demonstrations of product performance, as well as case studies of field performance and ROI, will be featured. Visit us at booth 1318.

Contact: Bob Ashby, VP of Sales – Industrial Products; bashby@thindiamond.com

ADT to Exhibit at the Calgary Pump Symposium November 2-3

The Calgary Pump Symposium is a two-day biennial event organized by major participants within the western Canadian pump industry including: manufacturers, engineering companies and end users. The event is being held at the Carriage House Inn on November 2nd and 3rd. Activities include:
• Thursday, November 2nd – Full day training courses on Centrifugal Pump Fundamentals, Mechanical Seals and Piping Plan Arrangements, Slurry Pumps or Pump Installation and Testing.
• Friday, November 3rd – 1 hour symposium presentations and discussions as well as a trade show over lunch.

Advanced Diamond Technologies will be located at table 20 to discuss how Ultrananocrystalline Diamond coatings are being used to improve pump seal MTBR & MTBF in high wear, low-lubricity, and intermittent dry-running conditions. We hope to see you there!

Contact: Bob Ashby, VP of Sales – Industrial Products; bashby@thindiamond.com

Advanced Diamond Technologies Pilots Framework for Transitioning Scientific Research to Commercial Channels

Romeoville, IL – Advanced Diamond Technologies (ADT), the world leader in developing and applying ultrananocrystalline diamond (UNCD®) coatings, is proud to announce that ADT was spotlighted at the Materials Research Society’s 2016 Technology Innovation Forum. During the forum, ADT participated in a panel discussion that highlighted a technology transfer model piloted by ADT’s founders.

Developed by Dr. Orlando Auciello and Dr. John Carlisle at Argonne National Laboratory in 2001, the technology transfer model provides a framework for forming a start-up company in order to commercialize research, which is a challenging transition for most laboratories. The Department of Energy and other national laboratories are now using the model to introduce scientific innovations into the marketplace.

“The framework was essential to getting ADT’s UNCD coating technology out of the research lab and into a commercial marketing channel,” said ADT co-founder Dr. Orlando Auciello.

The technology transfer model includes processes for effectively managing conflicts of interest, which can be a significant obstacle for the scientific community.

“The model re-imagines the entire technology transfer process from the ground up,” said ADT co-founder Dr. John Carlisle.

Since introducing UNCD, ADT has grown to become the most profitable thin film diamond company in the world, with numerous UNCD-coated products deployed in industrial, electronics, and water treatment applications.

“ADT is now not only profitable, but aggressively accelerating its products into multiple markets and applications,” said John Yerger, ADT’s president and CEO.

PICTURED: ADT co-founder John Carlisle (second from left) discussed ADT’s technology transfer model during a panel discussion at the 2016 Technology Innovation Forum.

About Advanced Diamond Technologies

Advanced Diamond Technologies, Inc. (ADT) is the world leader in developing and applying diamond films for electronic, mechanical, industrial and biomedical applications. ADT’s innovative UNCD® (ultrananocrystalline diamond) coating enables diamond — and its extreme properties — to be integrated into a wide range of products. ADT has earned numerous honors for its revolutionary engineering material, including the 2011 R&D 100 Award for its RF MEMS Switch/CMOS Device.

ADT is the Grand Sponsor of the 2014 NDNC Conference

Join Grand Sponsor, Advanced Diamond Technologies (ADT) for the international New Diamond and Nano Carbons Conference (NDNC 2014), from May 24 through May 29, 2014.

As the Grand Sponsor of NDNC, Advanced Diamond Technologies is sponsoring the welcome reception, conference banquet, poster sessions and will be exhibiting (visit booth #4). Co-Founder and CTO of ADT, Dr. John Carlisle will be giving an invited talk entitled, “Electronics Applications of CMOS-Compatible UNCD®“.

ADT’s CEO to attend Flowserve Press Conference at the Upcoming Turbomachinery/Pump Symposium

Advanced Diamond Technologies’ President and CEO, John Yerger to attend Flowserve Corporation Press Conference at the upcoming Turbomachinery and Pump User Symposium in Houston.

The press conference will be held at booth #731 at 3:30 pm on Tuesday, October 1. Along with members of Flowserve, Mr. Yerger will be discussing UNCD diamond coating for seal faces in conjunction with ADT’s new partnership with Flowserve.